HXY-44TL crawler tower rig integrated drilling rig HXY-4TL/42TL/44TL/5TL/6TL/6BTL crawler core drilling rig is based on our company's years of research, development and manufacture of geotechnical equipment, in order to meet the needs of various drilling processes with diamond drilling as the main body, and A new type of integrated core drilling rig developed can also be used for engineering geological exploration, hydrology, water well and large-diameter engineering construction. In addition to the advantages, it has the following outstanding features:
1. The perfect combination of hydraulic system and traditional mechanical drilling.
2. Equipped with hydraulic auxiliary winch and hydraulic mud pump, the whole machine has a compact structure and is easy to operate.
3. The hydraulic lifting tower is used, which is light and flexible.
4. Using 4 hydraulic outriggers, it is more stable.
5. It adopts crawler-type walking, the whole machine moves, and the relocation is convenient.
XY-4T main features:
1. The tower adopts a quadrangular mast assembly structure, ground installation, and hydraulic lifting of the tower. When the main engine moves back and the vertical shaft leaves the orifice, the movable pulley block of the crane can move forward, which can compensate for the backward movement of the main engine. The drilling tower can also adjust the angle clockwise for inclined hole operation.
2. The drilling rig has many speed series (8 stages) and a reasonable speed range, and the low-speed torque is large. Therefore, the drilling rig has strong technological adaptability and a wide range of use, which is not only suitable for small-diameter diamond core drilling, but also meets the requirements of large-diameter carbide core drilling and some engineering drilling.
3. The drilling rig is light in weight, good in disassembly, easy to relocate, and suitable for operation in mountainous areas.
4. The structure is simple, the layout is reasonable, and it is easy to maintain, maintain and repair.
5. The drilling rig has two reverse rotation speeds, which is convenient for accident handling.
6. The center of gravity of the drilling rig is low, the fixing is firm, the moving vehicle is stable, and the stability is good when drilling at high speed.
7. The instrument is complete, which is convenient for the observation of various drilling parameters.
8. The operating handle is centralized, easy to operate, simple and flexible.
9. The mud pump is independently driven, and the power configuration and airport layout are more flexible.
|Vertical shaft speed||Forward||83,152,217,316,254,468,667,970rpm|
|Maximum torque of vertical shaft||3200N·m|
|Vertical axis feeding process||600mm|
|Vertical shaft through hole diameter||92mm|
|Maximum lifting capacity of vertical shaft||120kN|
|Maximum pressure of vertical shaft||90kN|
|Wire rope diameter||17.5mm|
|Maximum lifting force of winch (single rope empty drum)||45kN|
|Rig maximum load||100kN|